LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-46
INFO LIF Command
Example
INFO ATMSAP $ZZLAN.ATM01.0.A.ATMSAP01
INFO ATMSAP $ZZLAN.ATM01.0.A.ATMSAP01, DETAIL
INFO ATMSAP $ZZLAN.ATM01.0.A.ATMSAP01, OBEYFORM
INFO LIF Command
The INFO LIF command displays the current attribute setting for the specified LIF.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LIF lif-name
is the name of the LIF for which information is to be displayed.
DETAIL
causes the INFO command to display detailed information about the LIF;
otherwise, only MAC addresses, associated PIFs, and PIF types are displayed.
OBEYFORM
causes the INFO command to display the information about the adapter in the form
of ADD LIF commands.
Considerations
The INFO LIF command is not supported for MFIOB adapters.
INFO [ /OUT
file-spec/ ] LIF lif-name [ , DETAIL | OBEYFORM]