LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-50
INFO PIF Command
INFO PIF Command
The INFO PIF command displays the physical interface (PIF) type and information
about the attributes of the PIF.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
PIF pif-name
is the name of the PIF for which information is to be displayed. If you do not specify
a PIF, the SCF subsystem displays information for all PIFs. The PIF name has the
form $ZZLAN.adapter-name.sac-unit#.pif-unit-letter, for example,
$ZZLAN.G11123.0.A.
DETAIL
causes the INFO command to display a list of detailed information about the PIF.
Without this option, the command displays only the name, MAC address, and type
information.
OBEYFORM
causes the INFO command to display the information about the adapter in the form
of ALTER PIF commands so you can recreate the adapter’s configuration.
Considerations

If no physical adapter exists or the PIF has not been STARTED, the display shows
00:00:00:00:00:00 for the MAC address.

PIF types are not supported on MFIOB adapters.

TRSA, E4SA, ATM3SA, FESA, GESA, and G4SA adapter types have PIF
attributes that you can alter. (See the ALTER PIF Command
on page 4-32.)
INFO [ /OUT file-spec/ ] PIF pif-name [ , DETAIL | OBEYFORM]