LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-51
INFO PIF Command
INFO PIF Display
The attributes displayed for INFO PIF are the same as those that can be altered with
the ALTER PIF command. See ALTER PIF for definitions of the attributes.
The display for the INFO PIF command with neither the DETAIL nor OBEYFORM
option selected is:
INFO PIF DETAIL Display For ATM3SA Adapters
The display format for INFO PIF with DETAIL selected for ATM3SAs is:
DATAFORWARDCONT df-count
indicates the configured maximum number of inbound frames queued before
delivery occurs
DATAFORWARDTIME df-time
indicates the configured maximum time an inbound frame waits before delivery.
EMSVERBOSE { ON | OFF }
indicates whether or not detailed informational EMS messages are enabled.
1>INFO PIF $ZZLAN.*
SLSA Info PIF \ROO.$ZZLAN
Name NodeMAC Address Type
$ZZLAN.E0153.0.A 08:00:8E:00:5E:F7 Ethernet
$ZZLAN.E0153.0.B 08:00:8E:00:5E:F8 Ethernet
$ZZLAN.E0153.1.A 08:00:8E:00:5E:F9 Ethernet
$ZZLAN.E0153.1.B 08:00:8E:00:5E:FA Ethernet
$ZZLAN.G11123.0.A 00:04:76:DC:0B:51 Ethernet
$ZZLAN.G11123.0.B 00:04:76:DC:0B:52 Ethernet
$ZZLAN.G11123.0.C 00:04:76:DC:0B:53 Ethernet
$ZZLAN.G11123.0.D 00:04:76:DC:0B:54 Ethernet
$ZZLAN.A0253.0.A N/A ATM
1> INFO PIF $ZZLAN.a0253.0.a.detail
SLSA Detailed Info PIF \ROO.$ZZLAN.A0253.0.A
Interface Speed......... 155Mbit/sec
PIF Type................ ATM
ATM3SA Specific Info
*DATAFORWARDCOUNT....... 2
*DATAFORWARDTIME........ 1
*EMSVERBOSE............. OFF