LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-53
INFO PIF Command
INFO PIF DETAIL Display for a FESA
The display for the INFO PIF command with the DETAIL option for FESAs is:
Hardware MAC Address
indicates the default MAC address from the SEEROM on the adapter.
Interface Speed
indicates the maximum speed of the network interface.
Max Frame Size
indicates the maximum frame size that the adapter can handle.
Min Frame Size
indicates the minimum frame size that the adapter can handle.
PIF Type
indicates the type of network interface.
Autonegotiation
indicates whether the sender and receiver can negotiate a line speed. If
Autonegotiation is ON, you may not alter the duplex value or linespeed value.
Duplex
indicates full-duplex operation or half-duplex operation.
Linespeed
indicates the line speed.
1>SCF INFO PIF $ZZLAN.F0253.0.a.detail
SLSA Detailed Info PIF \SYS.$ZZLAN.F0253.0.A
Hardware MAC Address.... 08:00:8E:00:90:13
Interface Speed......... 100Mbit/sec
Max Frame Size.......... 1516
Min Frame Size.......... 60
PIF Type................ Ethernet
FESA Specific Info
*AUTONEGOTIATION......... OFF
*DUPLEX.................. HALF
*LINESPEED............... 100