LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-55
INFO PIF Command
The INFO PIF display with AUTONEGOTIATION ON for a FESA is:
Hardware MAC Address
indicates the default MAC address from the SEEROM on the adapter.
Autonegotiation
indicates the status of automatic speed negotiation.
Duplex
indicates the setting of the duplex attribute of the FESA communication line.
Linespeed
indicates the setting of the FESA communication line.
Max Frame Size
indicates the maximum frame size that the adapter can handle.
Min Frame Size
indicates the minimum size frame that the adapter can handle.
NodeMACAddress
indicates the primary MAC address used by this node for all transmitted and
received frames. If the node MAC address is not supplied, the default MAC
address from the SEEROM on the adapter is used (that is, the hardware MAC
address). The high-order bit must be 0 and the next highest bit must be 1 for a
locally administered address.
PIF Type
indicates the type of network interface.
1>SCF INFO PIF \SYS.$ZZLAN.F0154.0.A, DETAIL
SLSA Detailed Info PIF \SYS.$ZZLAN.F0154.0.A
Hardware MAC Address.... 08:00:8E:00:DD:FB
*Autonegotiation..........ON
*Duplex...................
*Linespeed................
Max Frame Size.......... 1516
Min Frame Size.......... 60
*NodeMACAddress.......... 08:00:8E:00:DD:FB
PIF Type................ Ethernet