LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-60
INFO SAC Command
EarlyTokenRelease
specifies whether the adapter operates in Early Token Release mode (16 Mbps
operation only).
MaxSessions
is the maximum number of sessions that can be added to the adapter by all I/O
process methods. Currently, sessions can only be added by the SNATR MSAP.
Use this attribute to tune the adapter to match the most-common maximum
number of sessions being handled. The adapter allocates the resources for
MaxSessions; the smaller the value, the more transmit and receive buffers the
adapter has available for data.
RingSpeed
specifies the speed at which to run the token ring. Specify either 4 or 16 Mbps.
INFO SAC Command
The INFO SAC command displays configurable and non-configurable information
about the specified SAC.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SAC sac-name
is the name of the SAC for which information is to be displayed. The SAC name
has the form $ZZLAN.adapter-name.sac-unit#, for example, $ZZLAN.G11123.0.
DETAIL
causes the INFO command to display a list of detailed information.
OBEYFORM
causes the INFO command to display the information about the SAC in the form of
ALTER SAC commands, so that you can recreate the adapter’s configuration.
INFO [ /OUT file-spec/ ] SAC sac-name [ , DETAIL | OBEYFORM]