LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-61
INFO SAC Command
Considerations

The ServerNet identification (SvNet ID) is reset to 0x00000000 when CRU
information is not available or when the physical CRU is missing.

The firmware file version, firmware revision, and download version cannot be
displayed for the Ethernet port on the multifunction I/O board (MFIOB).

SvNet ID field is reset to 0x00000000 when CRU information is not available or
physical CRU is missing.
INFO SAC Display
The display for the INFO SAC command without the DETAIL option is:
Owner
indicates the processor that currently has the primary data path to the SAC.
Access List
shows the processors that can have data paths to the SAC.
The display for the INFO SAC command with the DETAIL option is:
1>SCF INFO SAC $ZZLAN.E0*
SLSA Info SAC
Name Owner *Access List
$ZZLAN.CC1.0 2 (2,3,1,0,11,10,13,12,9,8,4,5,6,7,14,15)
$ZZLAN.E0153.0 3 (3,2,1,0)
$ZZLAN.E0153.1 2 (2,3,1)
$ZZLAN.E0154.0 0 (0,1)
$ZZLAN.E0154.1 1 (1,0)
$ZZLAN.G11123.0 0 (0,1)
-> INFO SAC $ZZLAN.G11123.0 , DETAIL
SLSA Detailed Info SAC \SYS.$ZZLAN.G11123.0
*AutoFirmup............ ON
AutoReload............ ON
*AutoStart............. ON
*AutoDump.............. ON
*AccessList............ ( 0, 1, 2, 3 )
*DlFilename............ C0613P00
*FirmwareFilename...... C0612R00
*DumpFilename.......... C0613D00
SAC Type.............. G4SA SAC
Owner CPU............. 2
SvNet ID.............. 0x000E00D2
Download Version...... T0613G06_04JUN2004_04JUN2004
Firmware Revision..... T0612G06_04JUN2004_04JUN2004
Firmware File Rev..... T0612G06_04JUN2004_04JUN2004