LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem

LAN Configuration and Management Manual—520469-012

4-75

NAMES SAC Command

The NAMES SAC command displays the names of SACs in the SLSA subsystem.

Command Syntax

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

SAC sac-name

specifies the SAC for which a list of subordinate objects is to be displayed. The

SAC name has the form $ZZLAN.adapter-name.sac-unit#, for example,

$ZZLAN.G11123.0.

NAMES SAC Display

SAC

shows the name of the ServerNet addressable controller.

PIF

shows the name of the physical interfaces subordinate to the SAC.

RESET Command

RESET is a sensitive command that moves an object to a state from which it can be

started. This command interrupts a pending operation or takes an object out of a state.

The RESET ADAPTER command is intended mainly for resetting the POST-fail LED

so that the LED reflects the current result of a POST. Do not use the RESET

ADAPTER command during normal operation.

NAMES [ /OUT

file-spec / ] SAC sac-name

-> NAMES SAC $ZZLAN.G11123.0

SLSA Names SAC \SYS.$ZZLAN.G11123.0

SAC

$ZZLAN.G11123.0