LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-84
STATS PIF Command
Response Display
The STATS ATMSAP command displays the usage statistics for ATMSAP objects. The
display format is shown below. A failure is indicated when SCF displays an error
message.
Sample Time
is the time when the statistics were sampled.
Reset Time
is the time when the statistical counters were last reset.
Data Pkts Tx or Rx
is the total user data packets transmitted or received.
Discarded Pkts Tx
is the total user data packets discarded.
Considerations

The statistical counters are reset by the subsystem when an ABORT or STOP
command is processed.

The STATS ATMSAP command should be issued only when the object is in the
started summary state.
Example
STATS ATMSAP $ZZLAN.ATM01.0.A.ATMSAP01
STATS PIF Command
The STATS PIF command displays statistical information for the specified PIF. This is a
nonsensitive command except when the RESET option is specified.
3-> stats ATMSAP $zzlan.atm1.0.a.atmsap01
STATS ATMSAP \SYS.$ZZLAN.ATM1.0.A.ATMSAP01
Sample Time 26 August 1999, 17:18:04.643
Reset Time 26 August 1999, 17:07:03.021
DATA Pkts Tx 0D Data Pkts Rx 0D
Discarded Pkts Tx 0D Discarded Pkts Rx 0D