LAN Configuration and Management Manual

LAN Configuration and Management Manual—520469-012
xi
About This Manual
This manual describes how to configure, operate, and manage the ServerNet LAN
Systems Access (SLSA) subsystem on an Integrity NonStop NS-series or
NonStop S-series server. This manual includes descriptions of the Subsystem Control
Facility (SCF) commands used with the SLSA subsystem and a quick-reference
section showing the command syntax.
Who Should Use This Manual
This manual is written for anyone who configures, manages, or monitors the SLSA
subsystem on an Integrity NonStop NS-series or NonStop S-series server.
What’s in This Manual
This manual also contains a glossary of technical terms and abbreviations used
throughout the text.
Note. The Event messages (EMS) now reside in the Operator Messages Manual.
Table i. Summary of Contents
Section Title This section. . .
1 Configuration Quick Start
Provides key tasks for configuring your system
quickly.
2 Introduction to the SLSA
Subsystem
Describes the components and fault-tolerance
of the ServerNet LAN Systems Access (SLSA)
subsystem.
3 SLSA Subsystem Installation
and Configuration
Provides installation and configuration
information for the SLSA subsystem and
describes current configuration restrictions.
4 SCF Commands for the SLSA
Subsystem
Provides a detailed description and the
complete syntax of the Subsystem Control
Facility (SCF) commands applicable to the
SLSA subsystem and provides examples of
how to use those commands.
5 Managing the SLSA Subsystem
Provides descriptions of procedures for
managing the SLSA subsystem and how the
SLSA subsystem can recover from various
types of failures.
A Command Summary
Provides the SCF command syntax for SLSA.
B SCF Error Messages
Provides the text, cause, effect, and recovery
for the SLSA SCF error messages.