LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-96
STATS PIF Command
Singles
is incremented each time this adapter recognizes that it is the only adapter on the
ring. This field is provided for informational purposes only.
Frequency Errors
is incremented when this adapter detects that its incoming frames are being
transmitted at the wrong frequency. A non-zero count might indicate a hardware
problem in the adapter or its upstream neighbor.
STATS PIF Display for a GESA
SLSA Stats PIF \SYS.$ZZLAN.G0153.0.A
Sample Time..... 25 Jan 2002, 10:44:41.691
Reset Time...... 24 Jan 2002, 6:57:48.854
DFC Events............................. 0
DFT Events............................. 0
Exec Rate.............................. 0
Exec Rate LWM.......................... 0
TNET NACKS............................. 0
TNET Timeouts.......................... 0
In Frame Discard Errors................ 0
Out Frame Queue Length................. 0
Out Frame Discard Errors............... 0
802.3 Send Stats
Internal MAC TX Errors................. 0
Single Collision Frames................ 0
Multi Collision Frames................. 0
Deferred Transmissions................. 0
Excess Collision....................... 0
Late Collision......................... 0
Carrier Sense Errors................... 0
Octets................................. 0
Unicast Packets........................ 0
Multicast Packets...................... 0
Broadcast Packets...................... 0
XON Packets Sent....................... 0
XOFF packets Sent...................... 0