LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-97
STATS PIF Command
(STATS PIF display for a GESA continued)
Sample Time
indicates the time when the statistics were taken.
Reset Time
indicates when the statistics counters were last reset.
DFC Events
data forwarded because of DFC expiration.
DFT Events
data forwarded because of DFT expiration.
Exec Rate
number of times each second the main loop has been run.
Exec Rate LWM
low water mark for execution rate.
Packets Discards....................... 0
Packets Errors......................... 0
Total Collisions....................... 0
Flow Control Done...................... 0
802.3 Receive Stats
FCS Errors............................. 0
Alignment Errors....................... 0
Frames Too Long........................ 0
XON Pause Frames Received.............. 0
XOFF Pause Frames Received............. 0
XOFF State Entered..................... 0
Mac Control Frames Received............ 0
Octets................................. 0
Unicast Packets........................ 0
Multicast Packets...................... 0
Broadcast Packets...................... 0
In Range Length Errors................. 0
Out Range Length Errors................ 0
Packets Exceeded Jabbers Time.......... 0
Undersize Packets...................... 0
Fragments.............................. 0
Packets 64 Octets...................... 0
Packets 65-127 Octets.................. 0
Packets 128-255 Octets................. 0
Packets 256-511 Octets................. 0
Packets 512-1023 Octets................ 0
Packets 1024-1522 Octets............... 0
Packets 1523-2047 Octets............... 0
Packets 2048-4095 Octets............... 0
Packets 4096-8191 Octets............... 0
Packets 8192-9022 Octets............... 0