LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-100
STATS PIF Command
802.3 Receive Stats
FCS Errors
a count of frames received on a particular interface that are an integer number of
octets in length and do not pass the FCS check.
Alignment Errors
a count of frames received on a particular interface that are not an integer number
of octets in length and do not pass the FCS check.
Frames Too Long
a count of frames received on a particular interface that exceed the maximum
permitted frame size.
XON Pause Frames Received
MAC control frames with pause command and length equal to zero.
XOFF Pause Frames Received
MAC control frames with pause command and length greater than zero.
XOFF State Entered
Transmitting is disabled.
Mac Control Frames Received
MAC control frames with no pause command.
Octets
the number of octets received on the interface, including framing characters.
Unicast Packets
the number of packets, delivered by this sub-layer to a higher (sub)-layer, which
were not addressed to a multicast or broadcast address at this sub-layer.
Multicast Packets
the number of packets, delivered by this sub-layer to a higher (sub)-layer, which
were addressed to a multicast address at this sub-layer.
Broadcast Packets
the number of packets, delivered by this sub-layer to a higher (sub)-layer, which
were addressed to a broadcast address at this sub-layer.