LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem

LAN Configuration and Management Manual—520469-012

4-106

STATUS ADAPTER Command

The STATUS ADAPTER command displays the current state of the specified adapter.

The state of an ADAPTER object can be either STARTED or STOPPED.

Command Syntax

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

ADAPTER adapter-name

is the name of the adapter for which the status is to be returned. The adapter name

has the form $ZZLAN.adapter-name, for example, $ZZLAN.G11123.

DETAIL

specifies that additional status information is displayed.

STATUS ADAPTER Display

The format of the display for the STATUS ADAPTER command is:

The format of the display for the STATUS ADAPTER command with the DETAIL option

is shown below for a G4SA (the display format for all adapters is similar):

STATUS [ /OUT file-spec/ ] ADAPTER adapter-name [ , DETAIL ]

-> STATUS ADAPTER $ZZLAN.*

SLSA Status ADAPTER

Name State

$ZZLAN.CC1 STARTED

$ZZLAN.M0IE0 STARTED

$ZZLAN.E0153 STARTED

$ZZLAN.M0IE1 STOPPED

$ZZLAN.E0154 STARTED

$ZZLAN.E0152 STARTED

-> STATUS ADAPTER $ZZLAN.G11123 , DETAIL

SLSA Detailed Status ADAPTER \SYS.$ZZLAN.G11123

SP Cru Presence Status... Enabled ( 5 )

SP Cru Test Status....... Test OK ( Ox0004 )

State.................... STARTED