LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-107
STATUS ATMSAP Command
SP Cru Presence Status
indicates service processor (SP) information about the presence of a physical
adapter in the location associated with the specified adapter.
SP Cru Test Status
indicates SP information about the result of SP tests on the physical adapter in the
location associated with the specified adapter. The values are Test OK and Config
OK.
State
indicates the current state of the adapter.
STATUS ATMSAP Command
The STATUS ATMSAP command returns the operational-state information for an
ATMSAP object subordinate to a PIF object.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ATMSAP atmsap-name
is the name of the target ATMSAP object. atmsap-name is in the form
$ZZLAN.adapter-id.sac-id.pif-id.atmsap-id
where:
adapter-id
is a 1- to 8-character alpha-numeric string, beginning with an alpha character,
that identifies the parent SLSA ADAPTER. Wildcard characters are allowed.
sac-id
is a number that identifies the parent SAC object. The only valid sac-id for the
ATM3SA adapter is the number “0.” Wildcard characters are allowed.
pif-id
is an alpha character that identifies the parent PIF object. The only valid pif-id
for the ATM3SA adapter is the letter “A.” Wildcard characters are allowed.
STATUS [ /OUT file-spec/ ATMSAP atmsap-name [, DETAIL ]