LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-109
STATUS LIF Command
VCC (VPI,VCI)
identifies the ARP server virtual circuit connection with its virtual channel
identifier (VCI) and virtual path identifier (VPI).
VCC Nature
identifies the connection as being from a PVC or an SVC.
Remote ATM Address
ATM address for the destination.
Example
STATUS ATMSAP $ZZLAN.ATM01.0.A.ATMSAP01
STATUS LIF Command
The STATUS LIF command displays the current summary state and access state of the
specified LIF. The summary state of a LIF object can be either STARTED or
STOPPED. The access state is either UP or DOWN.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LIF lif-name
specifies the LIF for which the status is to be displayed. The LIF name has the
form $ZZLAN.lif-name, for example, $ZZLAN.L11123A.
DETAIL
specifies that additional status information is displayed.
Considerations
More than one processor can have a data path to a LIF.
STATUS [ /OUT file-spec/] LIF lif-name [ , DETAIL ]