LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-110
STATUS LIF Command
STATUS LIF Display
The format of the display for the STATUS LIF command without the DETAIL option is:
State
indicates the current state of the LIF.
Access State
indicates whether a LIF can currently access the PIF.
The format of the display for the STATUS LIF command with the DETAIL option is:
Access State
indicates whether there is at least one processor with a data path through the PIF
associated with the specified LIF. UP indicates at least one processor with a data
path. DOWN indicates no data path.
CPUs with Data Path
lists processors that have a successful data path for the PIF associated with the
specified LIF. NONE means that no processor has a data path through the PIF. The
processors are listed in numerical order.
Potential Access CPUs
lists processors that can potentially have a data path through the PIF associated
with the specified LIF. The Potential Access CPUs list is controlled through the
-> STATUS LIF $ZZLAN.L*
SLSA Status LIF
Name State Access State
$ZZLAN.CC10A STARTED UP
$ZZLAN.L11123A STARTED UP
$ZZLAN.L11123B STARTED DOWN
$ZZLAN.L11123C STARTED UP
$ZZLAN.L11123D STARTED UP
$ZZLAN.LANX STARTED UP
$ZZLAN.LANY STARTED UP
-> STATUS LIF $ZZLAN.L11123A , DETAIL
SLSA Detailed Status LIF \SYS.$ZZLAN.L11123A
Access State............. UP
CPUs with Data Path...... ( 0, 1, 2 )
Potential Access CPUs.... ( 0, 1, 2, 3 )
State.................... STARTED
Trace Filename...........
Trace Status.............