LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-113
Considerations
PID
indicates the processor and process ID of the LANMON process. Is left blank if a
LANMON has been aborted.
Priority
indicates the priority of the LANMON process. Is left blank if a LANMON has been
aborted.
QIO Pool Current
indicates the current size of the QIO pool used by the LANMON process.
QIO Pool Limit
indicates the limit on the amount of QIO pool space that the LANMON process can
allocate. 0 indicates no limit.
State
indicates the current state of the LANMON process. As of the G06.21 RVU, the
summary STOPPING state is now valid for a LANMON process.
Trace Filename
indicates the name of the trace destination file if TRACE is ON.
Trace Status
indicates if tracing has been enabled for the LANMON process.
Considerations
In order for the STATUS MON command to accept a wildcard, your system either must
have 16 processors or you must precede the STATUS MON command with the SCF
command ALLOW ALL ERRORS. See Verifying the Initial SLSA Subsystem
Configuration on page 1-2 for an example of using the ALLOW ALL ERRORS
command before using STATUS MON with a wildcard.
STATUS PIF Command
The STATUS PIF command displays the current summary state of the specified PIF
and its current trace status. The summary state of a PIF object can be STARTING,
STARTED, or STOPPED.