LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-114
STATUS PIF Command
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
PIF pif-name
specifies the PIF for which the status is to be displayed. The PIF name has the
form $ZZLAN.adapter-name.sac-unit#.pif-unit-letter, for example, G1134.0.A.
DETAIL
specifies that additional status information is displayed.
Considerations

Interface status information is not returned in the display for the DETAIL option.

E4SAs, CCSAs, FESAs, GESAs, G4SAs, ATM3SAs, and TRSAs have specific PIF
attributes (SWAN does not).
STATUS PIF Display
The format of the display for the STATUS PIF command for the FESA and CCSA is:
State
indicates the current state of the PIF.
Trace Status
indicates whether TRACE is active on the specified PIF.
The format of the display for the STATUS PIF command for the PIF on a TRSA is:
STATUS [ /OUT file-spec/ ] PIF pif-name [ , DETAIL ]
-> STATUS PIF $ZZLAN.E*.*
SLSA Status PIF
Name State Trace Status
$ZZLAN.CC1.0.A STARTED ON
$ZZLAN.F0152.0.A STARTED ON
-> STATUS PIF $ZZLAN.T0154.*
SLSA Status PIF
Name State Trace Status
$ZZLAN.T0154.0.A STARTED OFF