LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-115
STATUS PIF Command
STATUS PIF DETAIL for an E4SA
The format of the display for the STATUS PIF command with the DETAIL option for a
PIF on an E4SA is:
CPUs with Data Path
lists processors that have a successful data path for the specified PIF. NONE
indicates that no processor has a data path through the PIF. The processors are
listed in numerical order.
Last Error
indicates the severity, origin, and error code of the last error encountered by the
PIF. (0,0,0) indicates that no errors have occurred.
State
indicates the current state of the PIF.
Trace Filename
indicates the name of the file that stores current trace information if TRACE is ON
for the specified PIF.
Trace Status
indicates whether TRACE is active on the specified PIF.
Link Pulse State
indicates the current state of the link pulse on the physical Ethernet link. This field
is only applicable to the E4SA, FESA, GESA, and G4SA. The value of this field
can be either UP (normal condition) or DOWN.
-> STATUS PIF $ZZLAN.E0153.0.A , DETAIL
SLSA Detailed Status PIF \SYS.$ZZLAN.E0153.0.A
CPUs with Data Path...... ( 0 )
Last Error............... (0, 0, 0)
State.................... STARTED
Trace Filename...........
Trace Status............. OFF
E4SA Controller Status
Link Pulse State......... UP