LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-120
STATUS PIF Command
STATUS PIF DETAIL for a TRSA
CPUs with Data Path
lists processors that have a successful data path for the PIF associated with the
specified LIF. NONE means that no processor has a data path through the PIF. The
processors are listed in numerical order.
Interface Status
indicates the status of the PIF.
Last Error
indicates the last error encountered by the SAC in the form of (severity, origin,
error code). (0, 0, 0) indicates no errors have occurred. The possible origins are:
MON DIH
QIO LMLIB
NSK XIO
Filter SvNet Proc.
SvNet Int. DSM
NSK Config LAN Manager
Service Processor
State
indicates the current state of the PIF.
Trace Filename
indicates the name of the trace destination file if trace is on.
Trace Status
indicates whether tracing has been enabled for the PIF.
-> STATUS PIF $ZZLAN.T0154.0.A , DETAIL
SLSA Detailed Status PIF \SYS.$ZZLAN.T0154.0.A
CPUs with Data Path...... ( 0 )
Interface Status.........
Last Error............... (0, 0, 0)
State.................... STARTED
Trace Filename...........
Trace Status............. OFF
Interface Type ...........IP
Duplex....................FULL
Interface Speed...........100,000 Kbit/sec
TRSA Controller Status
Ring State............... OPENED
Ring Open State.......... OPEN SUCCESSFUL
Last Ring Status......... NO PROBLEMS