LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-123
STATUS PROCESS Command
STATUS PROCESS Command
The STATUS PROCESS command displays the current state of the LANMAN process.
The state of LANMAN can only be STARTED. This is a nonsensitive command.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
PROCESS $ZZLAN
specifies the LANMAN process for which the status is to be displayed. The name
of the LANMAN process is $ZZLAN.
DETAIL
specifies that additional status information is displayed.
STATUS PROCESS Display
The format of the display for the STATUS PROCESS command without the DETAIL
option is:
State
indicates the current state of the LANMAN process.
PPID
indicates the primary process and process ID of the LANMAN process.
BPID
indicates the backup process and process ID of the LANMAN process.
Priority
indicates the priority of the LANMAN process.
STATUS [ /OUT file-spec/] PROCESS $ZZLAN [ , DETAIL ]
-> STATUS PROCESS $ZZLAN
SLSA Status PROCESS
Name State PPID BPID Priority Trace Status
$ZZLAN STARTED ( 0, 22) ( 1, 11) 180 OFF