LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-126
STATUS SAC Command
STATUS SAC Display
The format of the display for the STATUS SAC command is:
Name
is the name of the SAC for which status information is being returned.
Owner
indicates the processor that currently has a data path to the specified SAC.
State
indicates the current state of the SAC specified in the preceding Name field.
Trace Status
indicates whether TRACE is active for the specified SAC.
The format of the display for the STATUS SAC command with the DETAIL option
follows. Note that in this display, a LANMON has been ABORTED and the fabric
status in the STATUS SAC, DETAIL display indicates that a LANMON is DOWN.
Current Access
lists processors that have successful access to the SAC. NONE indicates that no
processor has successful access to the SAC. The processors are listed in
numerical order.
-> STATUS SAC $ZZLAN.E0153.0
SLSA Status SAC
Name Owner State Trace Status
$ZZLAN.E0153.0 1 STARTED ON
status sac s1.1, detail
SLSA Detailed Status SAC \SYS.$ZZLAN.S1.1
Current Access........... ( 0, 2, 3 )
Last Download Time....... 20 May 2003, 15:12:53.185
Last Error............... (0, 0, 0)
Owner CPU................ 0
State.................... STARTED
Trace Filename...........
Trace Status............. OFF
Fabric Status
CPU Accesslist Fabric-X Fabric-Y
-------------- ---------- ----------
0 UP-PRIMARY UP
1 UP-PRIMARY UP
2 UP-PRIMARY UP
3 UP-PRIMARY UP