LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-127
STATUS SAC Command
Last Download Time
indicates the last time application microcode was downloaded into the adapter.
Last Error
indicates the last error encountered by the SAC in the form of (severity, origin,
error code). (0, 0, 0) indicates no errors have occurred. The origins can be:
MON DIH
QIO LMLIB
NSK XIO
Filter SvNet Proc.
SvNet Int. DSM
NSK Config LAN Manager
Service Processor
Owner CPU
is the processor that currently has ownership of the SAC. NONE means that no
processor owns the SAC.
State
indicates the current state of the SAC.
Trace Filename
indicates the file name that stores current trace information if TRACE is on for this
SAC.
Trace Status
indicates whether TRACE is active for the specified SAC.
Fabric Status
indicates the availability of X and Y fabrics for a particular processor in a SAC
accesslist. UP-PRIMARY indicates that the fabric is the primary fabric for a
particular processor and that it is in the UP state. (For the G4SA adapter type, if
the fabric is UP, the fabric status will just be up; unlike other SACs, no primary
indication will be shown since the notion of primary path has been eliminated and
path choice is made dynamically as long as a path is available.) DOWN indicates
that a processor is up but that fabric is not accessible. DISABLED indicates that
this fabric is permanently disabled by hardware design. CPU DOWN indicates that
the processor has halted or has not been reloaded. MON DOWN indicates that a
LANMON has been aborted and the LANMON’s associated processor is not
available to the X and Y fabrics. The UNKNOWN state is for the extreme case
when a fabric state is not in one of the other states, which may indicate a problem
with the SAC or ServerNet router.