LAN Configuration and Management Manual

Managing the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
5-7
Renaming an Adapter
3. Verify that the SACs and PIFs are in the STARTED state by using the SCF
STATUS SAC and SCF STATUS PIF commands.
4. Start the LIFs associated with the PIFs on the adapter.
5. Verify the status of the LIFs by using the SCF STATUS LIF command.
Renaming an Adapter
To rename an adapter, follow these steps.
1. Use the SCF STOP LIF or SCF ABORT LIF commands to stop the LIFs associated
with the PIFs on the adapter you are renaming.
STATUS SAC $ZZLAN.G11021*
SLSA Status SAC
Name Owner State
$ZZLAN.G11021.0 0 STARTED
STATUS PIF $ZZLAN.G11021*
SLSA Status PIF
Name State
$ZZLAN.G11021.0.A STARTED
$ZZLAN.G11021.0.B STARTED
$ZZLAN.G11021.0.C STARTED
$ZZLAN.G11021.0.D STARTED
START LIF $ZZLAN.L11021A
START LIF $ZZLAN.L11021B
START LIF $ZZLAN.L11021C
START LIF $ZZLAN.L11021D
STATUS LIF $ZZLAN.L11*
SLSA Status LIF
Name State Access State
$ZZLAN.L11021A STARTED UP
$ZZLAN.L11021B STARTED UP
$ZZLAN.L11021C STARTED UP
$ZZLAN.L11021D STARTED UP
$ZZLAN.L11131A STARTED UP
$ZZLAN.L11131B STARTED UP
$ZZLAN.L11131C STARTED UP
$ZZLAN.L11131D STARTED UP
STOP LIF ($ZZLAN.L11021A, $ZZLAN.L11021B, $ZZLAN.L11021C,
$ZZLAN.L11021D)
SLSA E00012 Object $ZZLAN.L11021C has registered client(s) and
so cannot stop.
ABORT LIF $ZZLAN.L11021C