LAN Configuration and Management Manual

Managing the SLSA Subsystem

LAN Configuration and Management Manual—520469-012

5-12

Replacing a LANMON Without a Cold Load

3. Determine if the primary LANMAN is in CPU 0 or CPU 01 by issuing the SCF

STATUS PROCESS command:

4. Use the SCF ABORT MON command to ABORT the LANMON in the CPU

associated with the backup LANMAN. For example, if the backup LANMAN is in

CPU 01:

5. Use the SCF START MON command to start the LANMON in CPU 01 (if the

backup LANMAN is in CPU 01). For example:

STATUS PROCESS $ZZKRN.#ZZLAN

NONSTOP KERNEL - Status PROCESS \HELLO.$ZZKRN.#ZZLAN

Symbolic Name Name State Sub Primary Backup Owner

PID PID

$ZZLAN $ZZLAN STARTED (0 ,15) (1 ,16)

255,255

NON STOP KERNEL

SLSA Status PROCESS

ABORT MON $ZZLAN.#ZLM01

START MON $ZZLAN.#ZLM01