LAN Configuration and Management Manual

Managing the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
5-13
Replacing a LANMON Without a Cold Load
6. Verify that the LANMON in CPU 01 has started and that SAC, PIF, and LIF access
is gained on that CPU:
7. Use the SCF SWITCH PROCESS command to switch operation of the LANMON
process to the backup LANMON process.
Status MON #ZLM01
Name State PID Priority Trace Status
$ZZLAN.#ZLM01 STARTED (3,302) 200 OFF
status sac G11021.0.A, detail
SLSA Detailed Status SAC \SYS.$ZZLAN.G11021.0.A
Current Access........... ( 0, 2, 3 )
Last Download Time....... 20 May 2003, 15:12:53.185
Last Error............... (3, LANMON, 2015)
Owner CPU................ 0
State.................... STARTED
Trace Filename...........
Trace Status............. OFF
Fabric Status
CPU Accesslist Fabric-X Fabric-Y
-------------- ---------- ----------
0 UP-PRIMARY UP
1 UP-PRIMARY UP
2 UP-PRIMARY UP
3 UP-PRIMARY UP
STATUS PIF $ZZLAN.G11021.0.A , DETAIL
SLSA Detailed Status PIF \SYS.$ZZLAN.G11021.0.A
CPUs with Data Path...... ( 1 )
Last Error............... (0, 0, 0)
State.................... STARTED
Trace Filename...........
Trace Status............. OFF
E4SA Controller Status
Link Pulse State......... UP
STATUS LIF $ZZLAN.L11*
SLSA Status LIF
Name State Access State
$ZZLAN.L11021A STARTED UP
$ZZLAN.L11021B STARTED UP
$ZZLAN.L11021C STARTED UP
$ZZLAN.L11021D STARTED UP
SWITCH PROCESS $ZZLAN