LAN Configuration and Management Manual

LAN Configuration and Management Manual—520469-012

1-1

1 Configuration Quick Start

This section describes your initial ServerNet LAN Systems Access (SLSA) subsystem

configuration and how to verify that required SLSA subsystem processes and objects

are configured and started.

To become familiar with the SLSA subsystem, refer to Section 2, Introduction to the

SLSA Subsystem.

Initial SLSA Subsystem Configuration

This subsection describes how the SLSA subsystem is configured by HP

manufacturing and includes information about:



The contents of the initial configuration files



Verification and troubleshooting tips for your intitial subsystem configuration



ServerNet adapters used by the SLSA subsystem:



ATM 3 ServerNet adapters (ATM3SAs)



6763 Common Communications ServerNet adapters (CCSAs)



Ethernet 4 ServerNet adapter (E4SA)



Fast Ethernet ServerNet adapter (FESA)



Gigabit Ethernet ServerNet adapter (GESA)



Gigabit Ethernet 4-port ServerNet adapter (G4SA)



Token-Ring ServerNet adapter (TRSA)



Versatile I/O (VIO) enclosure in NonStop NS-series servers

Note. All adapters ordered with a NonStop system are configured by HP manufacturing in the

initial system configuration. Only follow the procedures described in this section if you are

altering the configuration of the SLSA subsystem provided by HP or are installing additional

adapters.

Initial SLSA Subsystem Configuration 1-1

Verifying the Initial SLSA Subsystem Configuration 1-2

Troubleshooting Tips 1-5

Installing an Adapter 1-7

Changing the Initial SLSA Subsystem Configuration 1-8