LAN Configuration and Management Manual

SCF Error Messages
LAN Configuration and Management Manual—520469-012
B-2
SLSA 00005
Cause. An invalid access list (such as, unacceptable processor, nonexistent
processor, or incorrect number of processors) has been specified in the ALTER SAC
command.
Effect. SCF ignores the command, and the access list is not altered for the specified
SAC.
Recovery. Check the command, then reissue it. The access list must have from 2 to
16 valid processors specified for a SAC. For a MIOE adapter, the access list cannot
exceed 2 processors.
SLSA 00006
Cause. You attempted to use wild-card characters (*, ?) in an object name for a
command that does not support wild-cards.
Effect. SCF ignores the command.
Recovery. Reissue the command without wild-card characters in the object name.
SLSA 00007
Cause. An internal error occurred within the SLSA subsystem (LANMAN, LANMON,
DIH, QIO, XIO, ServerNet).
Effect. SCF ignores the command.
Recovery. This is a serious error. Contact your service provider with the
error-number, origin, level, and object-name information.
error-number
specifies an internal error number.
origin
specifies where the internal error originated, such as LANMAN, LANMON, DIH,
QIO, XIO, SvNET
SLSA E00005 Object object-name has been given an invalid
access list.
SLSA E00006 Object name object-id contains wild cards - not
allowed in object name for this command.
SLSA E00007 Internal Error error-number, Origin origin,
Severity level for object-name.