LAN Configuration and Management Manual

SCF Error Messages
LAN Configuration and Management Manual—520469-012
B-3
level
specifies whether this error is informative, warning, fatal, or unrecognized.
object-name
specifies the name of the object that generated the internal error.
SLSA 00008
Cause. The SCF command issued to the object specified by object-name requires
LANMAN to manipulate the configuration database. The manipulation failed as
specified by the cause and detail information.
Effect. SCF ignores the command.
Recovery. Check the command and correct all problems, then try the command
again. If failure persists, contact your service provider with the origin, cause, and
operation information.
origin
specifies the part of the subsystem where the error originated.
cause (detail)
specifies what caused the error. The errors are:
Invalid group, module, slot
Invalid slot number
Invalid adapter type
Record not found
Record found
Location already used
Obsolete record version
operation-type
specifies the operation the object was performing when the error occurred. The
operations are:
Locking
Unlocking
Inserting
Deleting
Reading
Updating
SLSA E00008 Configuration failure by origin due to cause
(detail) on operation operation-type for object-name.