LAN Configuration and Management Manual

SCF Error Messages
LAN Configuration and Management Manual—520469-012
B-6
Effect. The LIF is not assigned to the specified PIF.
Recovery. Assign a different PIF to the LIF you are attempting to add, or remove the
current PIF from the LIF you specified in the ADD LIF command. Use the INFO LIF
command to display the PIFs assigned to the LIFs in the SLSA subsystem.
SLSA 00016
Cause. A DELETE ADAPTER command was issued for an ADAPTER object that has
one or more subordinated PIFs linked to existing LIF objects. You cannot delete an
ADAPTER object until there are no subordinate objects (LIFs) dependent on PIFs of
the specified adapter.
Effect. You cannot delete the adapter object.
Recovery. To remove the ADAPTER object, you must first stop all LIFs that are linked
to PIFs subordinated to the specified adapter. Use the INFO LIF command to display
the names of the LIFs and their associated PIFs.
SLSA 00017
Cause. A command was issued to an object (specified by object-name) whose
parent is of an adapter type (for example, MFIOB) that does not support the specified
command.
Effect. SCF ignores the command.
Recovery. Reissue the command using a supported adapter type (for example,
E4SA).
SLSA 00018
Cause. A LOAD command was issued for a SAC object (specified by object-name)
whose previously specified firmware file contains inappropriate information for a
downloadable firmware file.
Effect. The firmware is not downloaded to the SAC.
Recovery. Use the INFO SAC and ALTER SAC commands to make sure the SAC has
a valid firmware file specified for it, then reissue the command.
SLSA E00016 Subordinate PIF of object-name has link to
existing LIF object.
SLSA E00017 Command not supported by adapter type of object
object-name.
SLSA E00018 Content of firmware file for object-name does not
have valid information.