LAN Configuration and Management Manual

SCF Error Messages
LAN Configuration and Management Manual—520469-012
B-8
SLSA 00022
Cause. The file name specified in an ADD ADAPTER or ALTER SAC command is not
valid or does not contain enough information to construct a fully qualified file name.
Effect. SCF ignores the command.
Recovery. Check the file name, then reissue the command.
SLSA 00023
Cause. The dump file name in an ADD ADAPTER or ALTER SAC command is not
valid because it does not end with 00.
Effect. SCF ignores the command.
Recovery. Use a valid file name that ends with 00, then reissue the command.
SLSA 00024
Cause. A SLSA process (either LANMAN or one of the LANMONs) is busy and cannot
process the given request at this time. LANMAN or LANMON is probably starting up.
Effect. SCF ignores the command.
Recovery. Retry command later. If this problem persists, contact your service
provider.
SLSA 00025
Cause. A command expired before a response from the adapter was received.
Effect. The SCF command you entered was initiated, but successful completion
cannot be guaranteed.
Recovery. If possible, check if the command completed successfully; otherwise,
reissue the command.
SLSA E00022 filename is an invalid filename
SLSA E00023 filename is an invalid dump filename
SLSA E00024 SLSA process is busy - cannot process request
SLSA E00025 SLSA command timed out on object-name