LAN Configuration and Management Manual

SCF Error Messages
LAN Configuration and Management Manual—520469-012
B-10
SLSA 00030
Cause. You specified a MAC address that is not between %H400000000000 and
%H7FFFFFFFFFFF. MAC addresses in this range are available as a
locally-administered MAC address.
Effect. The MAC address is not changed, and the command does not complete.
Recovery. Reissue the command using a valid, locally-administered MAC address.
SLSA 00046
Cause. A DELETE ADAPTER command was issued for an ADAPTER that has one or
more subordinated PIFs, each of which, in turn, has one or more subordinate objects.
The ADAPTER object cannot be removed while objects are subordinated to the PIFs
Effect. SCF ignores the command.
Recovery. Remove all objects that are subordinated, then issue the DELETE
ADAPTER command.
SLSA 00048
Cause. You issued an ADD ATMSAP command, and tried to subordinate it to a PIF
object which has 128 ATMSAP objects already subordinated to it.
Effect. SCF ignores the command.
Recovery. Up to 128 ATMSAP objects can be subordinated to a PIF on an ATM3SA
adapter. Delete an existing ATMSAP before adding the new one, or assign the new
ATMSAP to another PIF object that has less than 128 ATMSAPs subordinated to it.
SLSA 00050
Cause. You issued an ADD or ALTER LIF command in which the attributes
DATAFORWARDCOUNT and DATAFORWARDTIME were specified, but the LIF was
associated with a ATMSAP object.
SLSA E00030 Given MAC address is not valid as
locally-administered MAC address
SLSA E000 Subordinated PIF of <objname> has existing objects
subordinated to it
SLSA E00048 Maximum number of ATMSAP exceeded
SLSA E00050 DATAFORWARDCOUNT and DATAFORWARDTIME incompatible
with non-PIF LIF