LAN Configuration and Management Manual

Configuration Quick Start
LAN Configuration and Management Manual—520469-012
1-4
Checking the State of the SLSA Subsystem Objects
Checking the State of the Subnets
Use the SCF STATUS SUBNET command to determine the state of each
preconfigured subnet:
For conventional TCP/IP:
For Parallel Library TCP/IP and NonStop TCP/IPv6:
Checking the State of the Routes
Use the SCF STATUS ROUTE command to determine the state of each preconfigured
route:
For conventional TCP/IP:
For Parallel Library TCP/IP and NonStop TCP/IPv6:
Checking the State of the SLSA Subsystem Objects
Use the SCF STATUS ADAPTER command to get a list of all the running adapters in
the SLSA subsystem:
STATUS SUBNET $tcpip process-name.*
Note. Parallel Library TCP/IP is not supported on Integrity NonStop NS-series servers.
STATUS SUBNET $ZZTCP.*
STATUS ROUTE $tcpip process-name.#*
STATUS ROUTE $ZZTCP.*
STATUS ADAPTER $ZZLAN.*