LAN Configuration and Management Manual

SLSA Subsystem Installation and Configuration
LAN Configuration and Management Manual—520469-012
3-6
HP Manufacturing Naming Conventions (For G06.27
and Later G-Series RVUs and HO6.03 and Later H-
portid
is the combination of the slot number and port number mapped in the following
way for G4SA; this convention uses alphabetical letters A through U:
In the above table, G is the portid for Port C of the G4SA installed in slot 2 of an
IOAM.
HP Manufacturing Naming Conventions (For
G06.27 and Later G-Series RVUs and HO6.03
and Later H-Series RVUs and J06.03 and Later
J-Series RVUs)
For G06.27 and later G-series RVUs, and H06.03 and later H-series RVUs and J06.03
and later J-series RVUs, HP manufacturing uses a naming convention for processes
and devices that relates logical names to the physical location of devices. For more
detailed J-series naming conventions, refer to the applicable planning guide (for
example, the NonStop BladeSystem Planning Guide).
Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Port Number
AEI MRA
BFJ NSB
CGKPTC
DHL QUD
Table 3-2. Naming Convention for SLSA Subsystem and Related Processes
(G06.27 and Later G-Series RVUs, and H06.03 and Later H-Series RVUs, and
J06.03 and Later J-Series RVUs)
Process or Device Type Convention Example
LAN Manager (LANMAN)
process
Must be $ZZLAN $ZZLAN
LAN Monitor (LANMON)
process
$ZZLAN.#ZLMprocessorid $ZZLAN.#ZLM01
G4SA adapter object Ggroup-module-slot $ZZLAN.G11123
G4SA LIF object Lgroup-module-slot-PIF $ZZLAN.L11123A
TCP/IP process $ZTCnumber
is the first TCPSAM process for the
system
$ZTC0
SWAN concentrator Sconcnum S01