LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem

LAN Configuration and Management Manual—520469-012

4-4

SCF Objects

SLSA supports the following SCF objects:



ADAPTER



ATMSAP



LIF



PIF



PROCESS



SAC

The ADAPTER object represents the customer-replaceable unit (CRU) and provides

the SCF interface for managing the adapters.

The ATMSAP object represents an ATM-protocol-direct service access point interface.

It provides direct access to a VCC for Expand.

The LIF object represents the logical interface on the adapter and provides the SCF

interface for managing the LIFs. LIF objects are associated with either a PIF object or

an ATMSAP object.

The PIF object represents the physical interface and provides the SCF interface for

managing the PIFs.

The PROCESS object is used to control different aspects of the SLSA subsystem. The

manager process is called LANMAN and controls all LAN connectivity including

receiving DSM requests, starting the LAN Monitor (LANMON) process in each

processor and maintaining them persistently across failures, and assigning SACs to

LANMON processes. LANMON controls access to adapters, reporting driver interrupt

handler (DIH) errors, provides tracing, broadcasts state changes for SACs and

receives Simple Network Management Protocol (SNMP) requests.

Table 4-2. Sensitive and Nonsensitive SCF Commands

Sensitive Commands Nonsensitive Commands

ABORT INFO

ADD LISTOPENS

ALTER NAMES

DELETE STATS (without RESET option)

RESET STATUS

START VERSION

STOP

STATS (with RESET option)

SWITCH

TRACE