LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-8
ABORT ADAPTER Command
SUB [ ONLY | ALL | NONE ]
directs the command at a set of subordinate objects.
ONLY specifies that only the subordinate objects are affected.
ALL specifies that the named object and the subordinate objects are affected.
NONE specifies that none of the subordinate objects are affected.
Considerations

The ABORT ADAPTER command does not work if subordinate ServerNet
addressable controllers (SACs), logical interfaces (LIFs), physical interfaces
(PIFs), and ATMSAPs are not in the STOPPED state, unless you specify the SUB
ALL option.

To restart an aborted adapter, use the START command.

Use the STATUS command to determine the current summary state of the adapter.

If a subordinate SAC is in the DIAGNOSING state, you cannot abort the adapter.

Omitting the SUB option has the same effect as SUB NONE.

Including the SUB option without specifying ALL, NONE, or ONLY has the same
affect as SUB ALL.
Examples
The following are examples of the ABORT ADAPTER command:
ABORT ADAPTER $ZZLAN.G11123
ABORT ADAPTER ($ZZLAN.G11123, $ZZLAN.G11235)
ABORT ADAPTER $ZZLAN.G*
ABORT ADAPTER $ZZLAN.G11235, SUB ALL