LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem

LAN Configuration and Management Manual—520469-012

4-21

ADD ATMSAP Command

The ADD ATMSAP command configures an ATMSAP object subordinate to a PIF

object. The ATMSAP object is left in the STOPPED summary state if the command is

successful. The command is rejected if the ATMSAP object name is already

configured. The command is also rejected if the maximum ATMSAP objects

subordinate to the PIF object have already been defined.

Command Syntax

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

ATMSAP atmsap-name

provides a unique name for the ATMSAP object that is being configured. atmsap-

name is in the form

$ZZLAN.adapter-id.sac-id.pif-id.atmsap-id

where:

adapter-id

is a 1 to 8-character alpha-numeric string, beginning with an alpha character,

that identifies the parent SLSA ADAPTER. Wildcard characters are not

allowed.

sac-id

is a number that identifies the parent SAC object. The only valid sac-id for the

ATM3SA adapter is the number “0.” Wildcard characters are not allowed.

pif-id

is an alpha character that identifies the parent PIF object. The only valid pif-id

for the ATM3SA adapter is the letter “A.” Wildcard characters are not allowed.

atmsap-id

is a 1 to 8-character alpha-numeric string that identifies the target ATMSAP

object. Wildcard characters are not allowed.

ADD [ /OUT file-spec/ ] ATMSAP atmsap-name

[, MTU max-mtu-size ]

[, NATURE { PVC } ]

[, QOSSET { UBR } ]

[, VCC (vpi,vci) ]