LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-29
ALTER LIF Command
Valid values:
Response Display
The ALTER ATMSAP command returns only a success or failure indication.
Successful completion is indicated when SCF displays the prompt for the next
command. A failure is indicated when SCF displays an error message.
Example
ALTER ATMSAP $ZZLAN.ATM01.0.A.ATMSAP01, MTU 9180, NATURE PVC,
QOSSET UBR, VCC (0, 101)
ALTER LIF Command
The ALTER LIF command alters the data forward count (DFC) and data forward time
(DFT). The LIF object must be in the STOPPED summary state for ALTER LIF to
succeed.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LIF lif-name
is the name of the LIF to be altered. The LIF name has the form $ZZLAN.lif-id,
where:
lif-id
is a 1 to 8-character alpha numeric string, beginning with an alpha character
that identifies the target SLSA LIF object. Wildcard characters are not allowed.
Value Description
vpi
Configures the virtual path identifier. Only vpi 0 is
supported.
vci
Configures the virtual circuit identifier. The virtual circuit
identifier is a number in the decimal range of 0 to 4096.
ALTER [ /OUT file-spec/ ] LIF lif-name
[ , DATAFORWARDMODE df-mode ]
[ , DATAFORWARDUNIT df-unit ]
[ , DATAFORWARDCOUNT df-count ]
[ , DATAFORWARDTIME df-time ]