M8501 and M8502 ACL Installation and User's Guide (G06.28+, H06.04+, J06.03+)

Installing and Configuring the ACL Tape Drive for the
NonStop S-Series Server
M8501 and M8502 ACL Tape Drive Installation and User’s Guide—529972-003
A-10
Installation
8. Attach the power cord to the tape drive’s AC power receptacle. (See Figure 3-5 on
page 3-6 for the location.) Then plug the other end into an AC power outlet.
9. Toggle the power switch to the on position from the rear of the unit. See Figure 3-5
on page 3-6 for the location.
Note. The tape drive does not have protection against lightning surges. Customers in high-risk
areas should use external surge protection rated for use in their location and be able to handle
the power demand of the tape drive.