Managing Software Changes (G06.25+, H06.03+, J06.03+)

What Is in a Softdoc
Managing Software Changes—427169-005
A-8
Successive PVU Softdoc Example
Successive PVU Softdoc Example
SOFTWARE RELEASE DOCUMENT
Product Name: OSM SERVICE PROVIDER
SPR ID: T2728G07^AAL
DATE: 10AUG2004
Copyright Notice: HP CONFIDENTIAL: NEED TO KNOW ONLY
Copyright 2004 Hewlett-Packard Development Company, L.P. Protected as an
unpublished work.
The computer program listings, specifications and documentation herein
are the property of Compaq Computer Corporation and successor entities
such as Hewlett-Packard Development Company, L.P., or a third party
ssupplier andhall not be reproduced, copied, disclosed, or used in whole
or in part for any reason without the prior express written permission
of Hewlett-Packard Development Company, L.P.
Summary:
OSM provides support for S88000 processors, the IOAM enclosure
and its components,FCSA, G4SA, ESS disks, maintenance switch,
and UPS. This SPR supports the automatic data collection of
failed PMF, PMF2, IOMF,and IOMF2. It also supports attachment
of inventory files with periodic IRs. The Incorrect Logical
Configuration alarm for a SWAN or SWAN 2 adapter is automatically
cleared when the route is configured in SCF and the Verify Logical
Configuration action is performed on the adapter. The APPSRVR and
APPRVD processes no longer abend if the TCP/IP connection fails
while connecting to the OSM Service Connection. Path Switch alarm
on a disk is now deleted on successful completion of the Switch to
Primary Path or Switch to Backup Path action. A Bulk Fault alarm is
now generated if the power supply is removed when the cross-over
cable is not connected. OSM no longer generates an incorrect
Battery Differential Voltage alarm. EVNTPRVD process no longer
abends during powerfail. OSM provider processes no longer abend
just after being started. OSM Service Connection display no longer
flickers many times when a state change occurs on a disk.
Superseded SPRs: NONE
Requisite SPRs: T0179AAJ (See Note 1)
T0642AAA
T2727AAL
T8431AAE (See Note 2)
T9753AFC (See Note 3)
Note 1: T0179AAJ is required only if using G06.08 RVU.
Note 2: T8431AAE is required only if using G06.08 RVU.
Note 3: T9753AFC is required only if using G06.08-G06.10 RVUs.
Required Hardware: NonStop S-series server
Required Firmware: NONE
Required Software: NONE
Manuals: NONE
Installation Considerations:
Minimal system impact