Managing Software Changes (G06.25+, H06.03+, J06.03+)

What Is in a Softdoc
Managing Software Changes—427169-005
A-10
Successive PVU Softdoc Example
6. [AAL]
OSM provides basic health and monitoring support for the
UPS model R5500 that has ConnectUPS-X Web/SNMP interface card
installed. It also provides a link to the Web/SNMP interface card
for detailed device information and configuration.
(No SOLN)
7. [AAL]
This SPR supports the automatic data collection of failed
PMF, PMF2, IOMF, and IOMF2. This feature must be enabled in the
OSMCONF file; see the OSM Migration Guide for details.
(SOLN 10-040123-2648)
8. [AAL]
This SPR supports the attachment of inventory files with
periodic IRs. This feature must be enabled in the OSMCONF file
and configured in the OSM Notification Director (see the OSM
Migration Guide for details).
(SOLN 10-040123-2649)
Problems Corrected:
1. [AAL]
If the primary or alternate route for a SWAN or SWAN 2
adapter is not configured, OSM generates an Incorrect Logical
Configuration alarm. However, this alarm is not cleared when the
route is configured in SCF and the Verify Logical Configuration
action is performed on the adapter.
(SOLN 10-040308-3890)
2. [AAL]
The APPSRVR and APPRVD processes abend if the TCP/IP
connection fails when the user connects to the OSM Service
Connection.
(SOLN 10-040329-4577)
3. [AAL]
When a user initiated Switch to Primary Path or Switch to
Backup path action succeeds, OSM does not delete any existing
Path Switch alarm on the disk.
(SOLN 10-040413-5032)
4. [AAL]
OSM does not generate a Bulk Fault alarm on power supply
if it is removed when the cross over cable is not connected.
(SOLN 10-030910-9525)
5. [AAL]
OSM creates an incorrect Battery Differential Voltage alarm
on the battery when the battery is being charged.
(SOLN 10-031126-1586)
6. [AAL]
The EVNTPRVD process abends during powerfail.
SOLN 10-040227-3593)