Measure Reference Manual

ONLY
For all entities except PROCESSH and USERDEF, displays only the final TOTALS report.
If only one entity report is generated, the TOTALS report is not displayed.
For the PROCESSH entity, only aggregated PROCESSH data is displayed.
NOTE: PROCESSH data can be collected on either a per-code-file basis or a
per-procedure basis, depending on whether a code-file-spec was supplied when the
PROCESSH measurement was configured (via the ADD PROCESSH command). Thus,
the displayed totals can cover an entire code file or each of a set of code ranges within
the code file.
SUPPRESS
displays only the entity reports. (The TOTALS attribute is ignored if a report contains
only measurements for one entity.)
For PROCESSH, SUPPRESS indicates only per-process data is displayed. (Aggregated
data is not displayed.)
SUPPRESS has no effect on USERDEF reports.
ZERO-REPORTS { INCLUDE | SUPPRESS }
determines whether records containing only zero values are displayed. The default is
SUPPRESS.
INCLUDE
displays entity records even if all counter values are zero.
SUPPRESS
does not display entity records if all counter values are zero.
NOTE: Snapshot counters return a measurement value taken at a specific moment. A
non-zero snapshot counter value does not necessarily indicate activity during the
measurement interval. Snapshot counter values are typically not considered when evaluating
a record for the ZERO-REPORTS clause.
ZERO-VALUES { INCLUDE | SUPPRESS }
determines whether values less than 0.005 are displayed as zeros or blanks.
INCLUDE
displays zeros if counter values are less than 0.005.
SUPPRESS
displays blanks if counter values are less than 0.005.
The ZERO-VALUES attribute has no effect on structured files. The default is SUPPRESS.
*
resets all report attributes to default values.
Related Commands
PageFunctionCommand
45Specifies reportsADD MEASUREMENT
68Displays a report on selected entitiesLIST entity-type
86Displays a report on an active entityLISTACTIVE entity-type
95Displays a report about selected entities by interval recordsLISTALL entity-type
SET REPORT 113