Measure Reference Manual

*
measures all network communications lines in all CPUs.
$device
is the device name of the line to be measured. Use an asterisk (*) to indicate all network
lines.
cpu
is the number of the CPU in which the measured line is configured. To indicate all CPUs,
use an asterisk (*). The default is all CPUs.
%Htrackid
is the identifier of a specific 3880 SWAN concentrator enclosure of three CLIPs. (Each CLIP
controls two lines.) To indicate all TRACKIDs, use an asterisk (*).
The TRACKID is recorded in the SEEPROM of the controller. It is usually printed on an
external label on the enclosure as well.
clip
is 1, 2, or 3 to indicate a specific CLIP within a SWAN concentrator enclosure, or it is 1,
2, 3, 4, 5, or 6 to indicate a specific CLIP within a SWAN 2 concentrator enclosure. To
indicate all CLIPS, use an asterisk (*).
line
is 0 or 1 to indicate a specific line managed by a CLIP in a 3880 SWAN concentrator.
To indicate all lines, use an asterisk (*).
type
is a type number to indicate a particular protocol, such as 63 (Expand line handler). To
list valid values for line types, use SCF LISTDEV. To indicate all line types, use an asterisk
(*).
subtype
is a subtype number, such as 3 (FOX line handler). To see valid subtype numbers, use SCF
LISTDEV. The default is all subtypes that apply to type.
channel
(D-series) is the channel number of the line to be measured. The default is all channels.
ctrl
(D-series) is the controller number of the line to be measured. The default is all controllers.
unit
(D-series) is the unit number of the line to be measured. The default is all units.
DDL Record for NETLINE Entities (ZMS Style)
The ZMS Style DDL record for NETLINE entities is supported in Measure G11 and later PVUs.
The fields included in BRIEF reports are in boldface type.
ID Fields DDL Definition
DEFINITION zmsnline-id.
02 device-name type character 8.
02 logical-device type binary 32 unsigned.
02 device-type type binary 16 unsigned.
02 device-subtype type binary 16 unsigned.
02 pin type binary 16 unsigned.
02 trackid type character 6.
02 clip type binary 16 unsigned.
02 line type binary 16 unsigned.
02 reserved-1 type character 4.
end
256 Entities and Counters