Measure Reference Manual

* counter value items:
02 write-busy-time type binary 64.
02 read-busy-time type binary 64.
02 requests type binary 32 unsigned.
02 reads type binary 32 unsigned.
02 writes type binary 32 unsigned.
02 l2in-bytes type binary 32 unsigned.
02 l2out-bytes type binary 32 unsigned.
02 din4-bytes type binary 32 unsigned.
02 dout4-bytes type binary 32 unsigned.
02 cin4-bytes type binary 32 unsigned.
02 cout4-bytes type binary 32 unsigned.
02 u64-bytes type binary 32 unsigned.
02 u128-bytes type binary 32 unsigned.
02 u256-bytes type binary 32 unsigned.
02 u512-bytes type binary 32 unsigned.
02 u1024-bytes type binary 32 unsigned.
02 u2048-bytes type binary 32 unsigned.
02 u4096-bytes type binary 32 unsigned.
02 o4095-bytes type binary 32 unsigned.
* new entity identification item for D10:
02 channel type binary 16 unsigned.
* F40 new entity identification items:
02 TrackID type character 6.
02 Clip type binary 16 unsigned.
02 Line type binary 16 unsigned.
* F40 new counter value items:
02 l2in-bytes-f type binary 64.
02 l2out-bytes-f type binary 64.
02 din4-bytes-f type binary 64.
02 dout4-bytes-f type binary 64.
02 cin4-bytes-f type binary 64.
02 cout4-bytes-f type binary 64.
end
For descriptions of the header fields used by all entities, see Common Entity Header Fields (page 144).
Common ID Field DDL Definitions for NETLINE Entities
These ID fields are used in both styles of DDL records.
Fields are listed alphabetically.
CLIP
Number of counter ID control blocks available for new counter records in this processor at the end
of the reported measurement interval.
DEVICE-NAME
Device name of the measured line.
DEVICE-SUBTYPE
Additional information about the device type:
Single-line handler attached to a controller0
Multiline path handler1
Multiline line attached to a controller2
FOX line handler3
Single-line handler attached to a 6100 subsystem5
Multiline line attached to a 6100 subsystem6
258 Entities and Counters