Measure Reference Manual

DEVICE-TYPE
A value of 63, which indicates an Expand line.
LINE
Specific line within a CLIP on a SWAN controller: either 0 or 1.
LOGICAL-DEVICE
Logical device number of the measured line.
PIN
Process identification number of the primary process.
TRACKID
6-byte identifier returned by the 3880 controller SEEPROM and labeled externally on the enclosure.
Common Counter Field DDL Definitions for NETLINE Entities
These counter fields are used in both styles of DDL records.
Fields are listed alphabetically.
CIN4-BYTES
Number of Level 4 protocol bytes and NCP requests bytes (ACK, NAK, ENQ, PCHG, NCPM,
CONN, and CAN) read by the network line handler for an Expand line.
X.25 does not update this counter.
In G-series and earlier RVUs, this is a 32-bit counter. In H-series and J-series RVUs, this is a 64-bit
counter.
In G-series RVUs, the CIN4-BYTES-F field is a 64-bit version of CIN4-BYTES.
Counter type: Accumulating.
COUT4-BYTES
Number of Level 4 protocol bytes and NCP request bytes (ACK, NAK, ENQ, PCHG, NCPM,
CONN, and CAN) written by the network line handler for an Expand line.
X.25 does not update this counter.
In G-series and earlier RVUs, this is a 32-bit counter. In H-series and J-series RVUs, this is a 64-bit
counter.
In G-series RVUs, the COUT4-BYTES-F field is a 64-bit version of COUT4-BYTES.
Counter type: Accumulating.
DIN4-BYTES
Number of Level 4 data bytes read by the network line handler. This counter includes only user
data and, on D-series, message system protocol bytes. The data associated with line protocol is
ignored.
In G-series and earlier RVUs, this is a 32-bit counter. In H-series and J-series RVUs, this is a 64-bit
counter.
In G-series RVUs, the DIN4-BYTES-F field is a 64-bit version of DIN4-BYTES.
Counter type: Accumulating.
NETLINE 259