Measure Reference Manual

NOTE: You can measure ServerNet addressable controllers with a D-series RVU measurement
application if it specifies all controllers (ADD CONTROLLER *) or only a CPU number (ADD
CONTROLLER 2). To measure specific SACs, you must modify the entity identifiers.
PageTopic
324Entity specification syntax for SERVERNET entities
325DDL records for SERVERNET entities
327DDL field definitions for SERVERNET entities
332Usage notes for SERVERNET entities
335Examples of ServerNet measurements
Entity Specification Syntax for SERVERNET Entities
To describe SERVERNET entities:
SERVERNET entity-spec [, entity-spec ] ...
SERVERNET
collects measurements for physical I/O operations involving SACs.
entity spec
is specified as:
{ * }
{ cpu }
{ cpu [ ( node-class [ , group [ , module | remote-node[ , slot
[ , subdevice |
port [ , fiber ]|
remote-cpu ] ] ] ] ) ] [ ( type ) ] }
where:
*
measures all devices in all CPUs.
cpu
is a CPU number, which must be an integer in the range 0 through 15. The default is all
CPUs.
node-class
is the class of SACs to be measured: CLIM, CLMI, CLMO, CLMS, COLO, ENET, IPC, MONT,
NIOC, RIPC, SCSI , and SWAN.
Remote Interprocessor Communication (RIPC) describes communication with a CPU on a
remote ServerNet node.
Use an asterisk (*) to indicate all node classes. If node-class is not specified, all node
classes are measured.
group
is the group number of the SAC to be measured. (The group corresponds to the physical
enclosure). Use an asterisk (*) to indicate all groups. The default is all groups.
module
is the module number of the SAC to be measured. Use an asterisk (*) to indicate all modules.
The default is all modules.
remote-node
is the ServerNet node number. Only valid for Remote Interprocessor Communication (RIPC).
Use an asterisk (*) to indicate all nodes. The default is all nodes.
324 Entities and Counters