Measure Reference Manual

slot
is the slot number of the SAC to be measured. Use an asterisk (*) to indicate all slots. The
default is all slots.
subdevice
is a specific subdevice identifier in cases where the group, module, and slot identifiers
or the configuration name indicate more than one SAC. For RIPC, subdevice is equal to
the CPU number of a processor in a remote node, system, or ServerNet cluster. To indicate
all remote processors on the specified remote node, system, or ServerNet cluster, use an
asterisk (*). If not specified, the default is all remote processors on the specified remote
node, system, or ServerNet cluster.
port
identifies a specific ServerNet connector within the ServerNet PIC (or within the ServerNet
Blade Switch on a NonStop BladeSystem) which a CLIM is connected to. On NonStop
BladeSystems only, the valid port values are 3 to 8, or “*”. On all other systems, valid
values for port are 1 to 4, or “*”. The default is all ports.
fiber
identifies a specific connector within the ServerNet cable the CLIM is connected to. Valid
fiber values are 1 to 4. Fiber is only relevant on a NonStop BladeSystem. The default is
all fiber connections.
remote-cpu
is the number of the CPU on a remote ServerNet cluster with which the entity is
communicating. Only valid for RIPC. The default is all CPUs.
type
is the part number of a class of ServerNet addressable controllers.
NOTE: The type specification is not used for CLIM node classes.
DDL Record for SERVERNET Entities (ZMS Style)
The ZMS Style DDL record for SERVERNET entities is supported in Measure G11 and later PVUs.
The fields included in BRIEF reports are in boldface type.
ID Fields DDL Definition
DEFINITION zmssvnet-id.
02 node-class type binary 32 unsigned.
02 node-class-s type character 4
redefines node-class.
02 ctrl-type type binary 16 unsigned.
02 reserved-1 type character 2.
02 GMS.
03 group type binary 32 unsigned.
03 module type binary 32 unsigned.
03 remote-cluster type binary 32 unsigned
redefines module.
03 slot type binary 32 unsigned.
02 subdevice type binary 32 unsigned.
02 remote-cpu type binary 32 unsigned
redefines subdevice.
02 PF redefines subdevice.
03 port type binary 16 unsigned.
03 fiber type binary 16 unsigned.
02 adapter-name type character 64.
02 SAC-name type character 64.
end
SERVERNET 325