Measure Reference Manual

PIN of the GMOM process if this process is part of a NetBatch job; otherwise
zero.
GMOM-PIN
Job ID of the NetBatch job that initiated this process, assigned by the
indicated GMOM; otherwise zero.
GMOM-JOBID
GMOM-FULL-ID
64-bit redefinition of the individual GMOM fields as a single value. A value of zero indicates the
process is not part of a NETBATCH job stream.
GMOM-PROCESS-NAME
Name of the GMOM process that initiated the NETBATCH job that in turn initiated this process;
otherwise spaces.
GMOM-SYSNAME
Expand system name of the GMOM node if the GMOM process is remote; otherwise spaces.
INDEX
Index value of the counter. A single counter value has an index value of 0. Index values for an
array can range from 0 through 127.
NAME
Name of the user-defined counter.
OSSPID
If the process runs in the OSS environment, this field contains the OSS Process ID. If it is another
process, this field contains zeros.
PIN
Process identification number of the measured process.
PRIORITY
Priority of the measured process.
PROCESS-NAME
Name of the measured process.
PROGRAM-FILE-NAME
Name of the object file the process is executing. The name can apply to either a NonStop file or
an SMF file. PROGRAM-FILE-NAME has three subfields:
For NonStop files, is the device location of the physical file.
For SMF files, is the device location of the physical file that corresponds to
the logical file name is stored in the DEVICE-NAME field.
VOLUME
For NonStop files, is the device name of the physical volume on which the
program file is located.
SUBVOLUME
For NonStop files, represents the physical file name that was specified when
the process was executed.
FILENAME
For SMF files, represents a location-independent logical file name that was
used when the process was executed.
370 Entities and Counters