Measure Reference Manual

len
INT:value:1
is the length in bytes of this descriptor. len is 52 if the descriptor does not include the
configuration name or 116 if the descriptor includes the configuration name.
cpu^number
INT:value:1
is the number of the CPU on which the device is configured. Use the literal -1 to indicate all
CPUs.
servernet
INT:value:1
is the ServerNet fabric. This field identifies a specific path or set of paths to a supported physical
device. Use 0 to indicate the X fabric, 1 to indicate the Y fabric, or the literal -1 to indicate
both fabrics.
For devices connected by a ServerNet/DA, use the literal -1.
For devices connected by an FCSA, use 0 to indicate the X fabric. By convention, dual fabric
controllers are specified by X.
GMS
is the physical location address (group, module, slot). The GMS structure consists of these fields:
group
INT(32):value:1
is the group number of the device to be measured. (The group corresponds to the physical
enclosure.) Use the literal -1 to indicate all groups.
module
INT(32):value:1
is the module number of the device to be measured. Use the literal -1 to indicate all modules.
slot
INT(32):value:1
is the slot number of the device to be measured. Use the literal -1 to indicate all slots.
device^name
INT:value:12
is the name of the device to be measured. The name must be left-justified and blank-filled and
must start with a dollar sign ($). Use a dollar sign and an asterisk ($*) to indicate all devices.
scsi^id
INT(64):value:1
is the SCSI port identifier of the device to be measured. Use the literal -1 to indicate all SCSI
ports.
config^name
INT:value:32
is the configuration name of the device, as defined by the system configuration database.
config^name can also be the configuration name of either a single ServerNet addressable
controller (SAC) or an adapter that contains several ServerNet addressable controllers. In this
case, the specification includes all devices of the requested type that are supported by that
SAC or adapter.
config^name must be null-terminated and null-filled. An asterisk in the first byte indicates all
configuration names.
462 Entity Descriptors